How to Load a Top Load Washer
To load a top load washer, add clothes loosely around the agitator or impeller, keep the load level and below the top row of basket holes, and leave enough room for the items to move. Sort by color and fabric first, then measure detergent for the load size and cycle.
On this page (9 sections)
- How do you prepare clothes before loading a top load washer?
- What is the right way to load clothes around an agitator?
- How do you load an impeller top load washer?
- How full should a top load washer be?
- Where do you put detergent and other products?
- What mistakes make a top load washer clean poorly?
- When should you run a cleaning cycle on a top load washer?
- Which washer features make loading easier?
- The short version on loading a top load washer
To load a top load washer, add clothes loosely around the agitator or impeller, keep the load level and below the top row of basket holes, and leave enough room for items to move. Sort by color and fabric first, then measure detergent for the load size and cycle.
Loading matters more on a top load washer than many people expect. The basket fills from the bottom, and the agitator or impeller needs space to push water and fabric around.
Pack it tight and detergent can't reach the middle of the pile.
How do you prepare clothes before loading a top load washer?
Sort first, then empty pockets and close fasteners. Sorting protects colors and fabrics, and a few seconds of pocket checks prevents small items from jamming the pump or scratching the basket.
Separate whites, lights and darks into their own loads. Keep heavy items like denim and towels apart from delicates and knits.
Check pockets for coins, tissues and keys, and zip zippers and hook bra straps so they don't snag other clothes.
Turn prints and dark items inside out to reduce fading and pilling. Shake out each piece before it goes in.
A loose shake stops sleeves from staying bunched through the whole cycle.
Treat stains before the wash rather than after. Pre-treat with a stain remover or a little detergent and let it sit for a few minutes.
Then load the treated items so the stained side faces the center of the basket.
What is the right way to load clothes around an agitator?
Place items one at a time around the agitator post, not on top of it. The post needs clear space to turn, and clothes should sit in the ring between the post and the basket wall.
Drop larger items in first and smaller ones after. Spread them evenly around the circle so the basket stays balanced.
Don't wrap a long item like a sheet around the post, because it can tangle and stall the wash.
Keep the top of the load below the highest row of holes in the basket. Water needs to flow through those holes, and a load above them can ride up and stay dry.
Bulky items like comforters should go in loosely, one at a time. If a comforter fills more than about two-thirds of the basket, split the load or use a larger machine.
Our guide to the best top load washers covers machines with bigger baskets for bedding.
How do you load an impeller top load washer?
Spread clothes in a loose, even layer across the whole basket floor. An impeller sits flat at the bottom and moves water and fabric in a circular motion, so the load needs to cover the base without piling up.
Don't stack clothes in a tower in the middle. A pile leaves the outer edges empty and the middle packed too tight for water to move through.
Lay each item flat and let the next one overlap slightly.
Leave a little space between the load and the basket wall so items can slide as the impeller turns. A balanced, flat load spins better and drains more completely at the end.
Some impeller washers handle bulky items better when they go in first, with lighter clothes on top. Check the cycle guide for bulky or bedding settings before you guess.

A flat impeller basket with 10 cycles and a soft close lid, for households that load sheets and everyday clothes in layers.
See it on AmazonHow full should a top load washer be?
Fill the basket to about three-quarters full, or roughly two-thirds for bulky items. A full top load washer should still let your hand press the clothes down an inch or two without force.
The load should move freely when the cycle starts. If clothes are packed above the top row of holes or you had to shove the last item in, take some out.
An overloaded washer can leave detergent trapped in the fabric and strain the drive.
Underloading has its own cost. A tiny load on a large water setting wastes water and energy, so match the load size to the cycle.
Many washers set the water level for you based on what they sense.
Weigh your options if loads vary a lot. A machine with Express Wash cycles helps for small loads, and a bigger basket suits family laundry.
The Kenmore 4.5 cu ft top load washer review covers how basket size and cycle choices work together.
How much can a 4.4 or 4.5 cubic foot washer take?
Expect a 4.4 to 4.5 cubic foot top load washer to handle a typical family load plus a set of towels. These sizes fit everyday clothes, sheets and most comforters, with room to spare for a medium load.
The Kenmore 4.4 cu ft model with a Triple Action Agitator has 10 wash cycles, four temperature options and an Extra Rinse setting. The 4.5 cu ft Kenmore with a Triple Action Impeller offers the same cycle count and temperature choices in a slightly larger basket.
Don't fill either machine to the rim just because the basket looks deep. Follow the same three-quarters rule.
A larger basket means fewer loads, not heavier ones.
Where do you put detergent and other products?
Measure detergent into the dispenser or directly into the water as your model directs. More soap doesn't mean cleaner clothes, and extra suds can leave residue and slow the rinse.
Use the amount on the detergent label for your load size and soil level. High-efficiency washers need HE detergent, which is low-suds.
If your machine has a dispenser drawer, add detergent and fabric softener to the marked compartments.
Should you put pods in before or after the clothes?
Put a pod in the empty basket first, then add clothes on top. Pods need water to dissolve fully, and burying one under a packed load can leave a sticky film on fabric.
Never put a pod in a dispenser drawer. Add only one pod per load and skip pods for very small or very short cycles.
How do you use fabric softener and bleach correctly?
Add liquid fabric softener to the dispenser or the rinse setting, never straight onto dry clothes. Bleach goes in its own dispenser or diluted in water before the wash starts.
Don't mix bleach and softener in the same load. Read the garment tags first.
For more on keeping the machine itself fresh, see our guide to the best front load washers if you're comparing machine types.
What mistakes make a top load washer clean poorly?
Overloading, packing one side and adding too much detergent are the three that show up most. Each one stops water and soap from reaching the middle of the load.
Other common mistakes include leaving items tangled around the agitator, washing delicates with heavy jeans, and skipping the sort so lint and color transfer spread across the load. Loading wet clothes from a previous cycle also unbalances the basket.
Balance matters most during the spin. If the washer thumps or stops, open the lid and spread the load evenly.
A top load washer is easy to reload mid-cycle on most models.
Keep the basket clean as well. A dirty basket transfers odors and grime onto every load.
Affresh tablets are designed to clean the drum, pump and filter, and the brand says one tablet once a month is enough.

A monthly cleaning tablet for top load and front load washers that helps remove odor-causing residue from the drum and pump.
See it on AmazonWhen should you run a cleaning cycle on a top load washer?
Run a cleaning cycle once a month, or sooner if clothes start smelling musty. Residue from detergent and softener builds up in the basket and pump, and a cleaning tablet or the machine's Clean Washer cycle clears it out.
Wipe the lid and the top edge of the basket with a damp cloth. Leave the lid open after each wash so moisture can escape.
A closed lid traps damp air and encourages mildew around the rim.
Check the fabric softener dispenser for buildup, since that's a common spot for residue. If your washer has a filter or lint trap, clean it as the cycle guide directs.
Which washer features make loading easier?
A soft close lid and clear controls help most, and cycle choices matter for mixed loads. A tempered glass lid lets you see the load without lifting it, and a soft close hinge stops it slamming.
The Kenmore 4.4 cu ft model has a Triple Action Agitator, light-touch controls and an LED display that shows time remaining. Its Express Wash cleans small loads in about 28 minutes, according to Kenmore, and Accela Wash speeds up full loads.
Kenmore says the Cold Clean cycle uses up to 90% less energy than the normal cycle on default settings.
The 4.5 cu ft impeller model offers similar controls and a soft close glass lid. Its Express Wash takes about 30 minutes on a small load.
If noise matters in your home, our comparison of whether front load washers are quieter than top load covers how the two designs differ.
The short version on loading a top load washer
Knowing how to load a top load washer comes down to loose, even layers, a basket that's never packed past the top holes, and detergent measured for the load. Sort first, load around the agitator or across the impeller, and keep bulky items to about two-thirds of the basket.
Pick a machine that fits how you load. The Kenmore 4.4 cu ft agitator model suits households with tough stains and mixed fabrics, while the 4.5 cu ft impeller model gives slightly more room for bedding.
Compare both in our guide to the best top load washer for family laundry.
Frequently asked questions
Should I put detergent in before or after the clothes?
Follow the washer's controls and detergent instructions. Many top load washers work best when you start the cycle so water begins filling, add the measured detergent, then load the clothes so the soap mixes into the water rather than sitting on fabric.
Can I wash shoes in a top load washer?
Only if the washer's cycle guide allows it. Remove loose laces and dirt first, place shoes in a mesh bag or with towels to cushion the basket, and choose a gentle cycle.
Avoid shoes with metal cleats or heavy soles that can strike the basket.
Why do my clothes come out wrinkled after a top load wash?
An overloaded basket is the usual cause. Clothes need room to tumble and separate during the wash and rinse.
Reduce the load size, shake items out before transferring them to the dryer, and choose a lower spin speed for delicates.
Is it better to load a top load washer before or after adding water?
Either order works on most models, but check your cycle guide. Some washers sense the load and set the water level automatically, so loading first lets the machine measure the load.
On models with a manual water-level knob, loading first helps you pick the right setting.
About this guide: Our look at loading a top load washer draws on maker specs, materials and what owners report. See how we research.


